|
Hi-Low Intensive Care Bed
- Size:
198L x 90W cms. Height adjustable from 60cms. to 80cms.
- Base and frame work made of CRC Steel
tubes mounted on four castors of 12.5 cms dia. (two with brakes).
- Four section steel sheet top uniformly
perforated.
- Four separate screw levers for
manoeurving backrest, kneerest, trendlenberg & R-Trend and Hi-Low
positions.
- Head and leg ends made of S.S. tubular
pipes assembled to laminated panels.
- Removeable type collapsible full
length steel railings with EPC frame.
- Four rubber buffers provided to
prevent damage to hospital walls.
- Telescopic S.S. Saline rod with 4
locations. Mounted on four castors of 12.5 cms dia (two with brakes).
- Pre-treated and epoxy powder coated.
- Optional Accessories :
Hydraulic pump for Hi-Low position and Radio lucent chest X-Ray top
with cassette holder.
|
|
Recovery Bed
- Size:
198L x 90W x 60H cms.
- Base and frame work made of
strong CRC Steel tubes/channels mounted on four castors of 12.5
cms dia. (two with brakes).
- Four section press bent steel
top fitted to the main frame on elevated deck which permits
trendlenberg and R-trend, low cardiac and spinal hyper extension
positions.
- Head and leg bows of stainless
steel tubular pipes assembled to laminated panels.
- Sliding type patient safety
railings.
- Stainless Steel saline rod for
two locations.
- Four rubber buffers provided to
prevent damage to hospital walls.
- Pre-treated and epoxy power
coated.
|
|
Fowler Position Bed (Delux)
- Size:
198L x 90W x 60H cms.
- Frame work made of strong
rectangular steel tubes.
- Four section top of CRCA M.S.
sheet uniformly perforated.
- Legs of CRC tubular pipes
mounted on four heavy dury 10cms dia castors.
- Two separate screw levers
operated from foot end for maneuvering backrest and kneerest
positions smoothly.
- Head and leg bows of S.S.
Tubular pipes assembled to laminated panels.
- Four rubber buffers for
preventing damage to hospital walls.
- Four saline location available.
- Pre-treated and epoxy powder
coated.
- I.V. drip rod optional.
|
|
Fowler Position Bed
(Standard Model)
- Size:
198L x 90W x 60H cms.
- Frame work made of strong
rectangular steel tubes.
- Four section top of CRCA M.S.
Sheet uniformly perforated.
- Head and leg bows of seamless
steel tubular pipes with vertical supports mounted on four heavy
duty castors of 10 cms. dia.
- Two separate screw levers
operated from foot end for manoeuvring backrest & kneerest
positions smoothly.
- Four saline locations available.
- Pre-treated and epoxy powder
coated.
|
|
Semi-Fowler Position Bed -Delux
- Size:
198L x 90W x 60H cms.
- Frame work made of strong
rectangular steel tubes.
- Two section top of CRCA M.S.
Sheet uniformly perforated.
- Legs of CRC tubular pipes
mounted on four heavy duty 10 cms. dia castors.
- Backrest section maneuvered by a
screw lever from foot end.
- Head and leg bows of S.S.
tubular pipes assembled to laminated pannels.
- Four rubber buffers for
preventing damage to hospital walls.
- Four saline locations available.
- Pre-treated and epoxy powder
coated.
|
|
Semi-Fowler Position Bed
(Standard Model)
- Size:
198L x 90W x 60H cms.
- Specifications as per model
HF-410 above, but head and leg bows of seamless steel tubular
pipes with vertical supports on either side mounted on four
heavy duty rubber castors.
|
|
Hospital Bed Two Section - Delux
(With Built-in-Backrest)
- Size:
198L x 90W x 60H cms.
- Frame work made of strong
rectangular steel tubes.
- Two section top of CRCA M.S.
Sheet univormly perforated.
- Backrest section adjustable on
ratchet mechanism.
- Head and leg bows of steel
tubular pipes assembled to laminated pannels.
- Legs of CRC tubular pipes
mounted on four heavy duty rubber shoes.
- Four rubber buffers for
preventing damage to hospital walls.
- Pre-treated and exoxy powder
coated.
|
|
Hospital Bed Two Section - Standard
(With Built-in-Backrest)
- Size:
198L x 90W x 60H cms.
- Specifications as per model
HF-412 above, but head and leg bows of seamless steel tubular
pipes with vertical supports on either side.
|
|
Attendant Bed
- Size:
72"L x 24"W x 16"H
- Frame work made of strong
rectangular steel tubes.
- Perforated CRCA steel sheet top.
- Head and leg bows of steel
tubular pipes assembled to laminated pannels.
- Mounted on two 7.5 cms dia.
castors and two rubber shoes.
- Pre-treated and epoxy powder
coated.
|
